Welcome to NANTONG BAIWEI ELECTRIC CO., LTD
LANGUAGE: 中文版 ∷? 英文版
YOUR LOCATION:HOME > PRODUCT> Transposed wire
  • Continuously?Transposed?Conductors(CTC)

Continuously?Transposed?Conductors(CTC)

    Product introduction

    Transposition conductor is made of a certain number of enameled flat wires arranged in two columns in sequence by special technology, and made of special insulating materials


    Winding wire made of winding material. It is mainly used to manufacture the windings of large oil immersed power transformers, reactors and large capacity dry-type transformers. By using transposed conductor to make transformer, the space utilization ratio of winding is improved, the volume is reduced and the cost is reduced. More importantly, the additional loss of circulation and eddy current caused by leakage magnetic field are reduced. At the same time, it has the advantages of improving the mechanical strength of the winding and saving the winding time.


    The continuous transposed conductor is an important material for the manufacture of transformer winding. The utility model has the advantages of high space utilization rate, low eddy current loss, high mechanical strength and less winding time of the coil.


    Product range

    Paper insulated acetal enamelled transposed conductor

    Paper insulated self-adhesive acetal enamelled transposition conductor

    Paper insulated self-adhesive semi-rigid acetal enamelled transposition conductor

    Paperless binding acetal enamelled transposition conductor

    Step transposition combined conductor

    Inner screen transposition combination wire

    Polyesterimide enamelled transposition conductor

    Polyvinyl alcohol and polyester film insulated transposition conductor


    Production scope:

    Transposition number: 5 – 80 (odd or even optional);

    Maximum dimension: height 120 mm, width 26 mm (tolerance ± 0.05 mm);

    Single conductor size: thickness a: 0.90 – 3.15 mm, width B: 2.50 – 13.00 mm (tolerance ± 0.01 mm);

    The recommended width thickness ratio of a single conductor is: 2.0 < B / a < 9.0;

    The recommended coating thickness of enameled wire is 0.08-0.12mm. The thickness of  adhesive layer is 0.03-0.05mm.


On a:沒有了! The next article:沒有了!

Online inquiry

PRODUCT

NEWS

CONTACT US

NANTONG BAIWEI ELECTRIC CO., LTD

MOBILE:13506297676

TEL:0513-88360458

FAX:0513-88360388

EMAIL:ntbwe@163.com

ADDRESS:No. 16, middle development avenue, Haian Development Zone, Jiangsu Province